Blog
FreeMax MX Replacement Coils Review: CoilTech 4.0 Mesh Options in Dubai
Picking the right FreeMax MX Replacement Coil comes down to matching resistance to your tank and target wattage rather than grabbing whichever coil is on the shelf. This FreeMax MX Replacement Coils review walks through the CoilTech 4.0 build, the four resistance options in the 3-pack, and where each one fits before you order it in Dubai.
Last reviewed and price-checked: September 2026.
Jump to:
FreeMax MX Replacement Coils Review: Overview
The FreeMax MX Replacement Coils pack ships 3 coils per pack from the FreeMax MX Coil Series, built on FreeMax’s CoilTech 4.0 platform with Tea Fiber Cotton wicking. Four resistance options are offered under this listing: a 0.15ohm MX1 Single Mesh Coil rated 50-80W, a 0.2ohm MX2 Double Mesh Coil rated 60-90W, a 0.15ohm MX3 Triple Mesh Coil rated 80-110W, and a 0.12ohm MX1 SS316L Single Mesh Coil. Coil material is high-grade FeCrAl across the mesh options, with the SS316L variant offering a metal FreeMax uses for temperature-control setups. At Vaps Shop AE, the pack is priced at AED 60 and is currently in stock, with delivery across all seven emirates.
Design and Build
FreeMax builds the MX series around mesh coil heads rather than traditional round-wire coils, using flat mesh strips wrapped in Tea Fiber Cotton to spread heat more evenly across the wicking surface. The FeCrAl mesh options – MX1, MX2 and MX3 – are the standard picks for direct wattage vaping, while the SS316L single mesh variant is built from stainless steel, the material FreeMax uses when a coil needs to support temperature-control modes on a compatible mod. Each coil in the 3-pack is a drop-in replacement head rather than a full tank, so the existing tank base and glass are reused every time a coil is swapped.
CoilTech 4.0 Features
CoilTech 4.0 is FreeMax’s current coil platform, and this listing groups four of its mesh configurations into one pack so vapers can compare resistance and wattage side by side before choosing a coil for a session. The table below lays out the four options exactly as listed by FreeMax:
| Coil | Resistance | Wattage Range | Material |
|---|---|---|---|
| MX1 Single Mesh | 0.15ohm | 50-80W | FeCrAl |
| MX2 Double Mesh | 0.2ohm | 60-90W | FeCrAl |
| MX3 Triple Mesh | 0.15ohm | 80-110W | FeCrAl |
| MX1 SS316L Single Mesh | 0.12ohm | Not specified by FreeMax | SS316L |
Coil Options and Resistance Range
The 0.15ohm MX1 Single Mesh coil sits at the lower wattage end of the set at 50-80W, suited to vapers who want a single mesh strip rather than multiple. Moving up, the 0.2ohm MX2 Double Mesh coil runs 60-90W across two mesh strips, and the 0.15ohm MX3 Triple Mesh coil is rated highest at 80-110W across three mesh strips, aimed at vapers running their tank closer to the top of its wattage range. The fourth option, the 0.12ohm MX1 SS316L Single Mesh coil, swaps FeCrAl for SS316L metal; FreeMax’s short description does not list a wattage range for this variant, so check your mod’s temperature-control or wattage settings before use.
Tank and Device Compatibility
FreeMax lists this pack under its MX Coil Series, meaning it is built to fit tanks designed around FreeMax’s MX coil form factor rather than being a universal fit across brands. FreeMax’s short description for this listing does not name a specific tank model, so it is worth checking your existing FreeMax tank’s coil slot against the MX series before ordering a fresh pack. If you are assembling a full setup rather than restocking coils for a tank you already own, the Vape Kit and Starter Kit categories at Vaps Shop AE list current tank and mod options.
Who Should Buy It
This 3-pack suits FreeMax MX tank owners who vape often enough to go through coils regularly and want a choice of resistance rather than a single fixed option. The MX2 Double Mesh and MX3 Triple Mesh are the picks for higher-wattage, denser-vapour sessions, while the MX1 Single Mesh sits at a more moderate wattage band. Vapers running temperature-control modes may lean toward the SS316L variant instead of the FeCrAl options. It is less relevant for anyone using a different tank brand’s proprietary coil slot, since FreeMax’s MX coils are built for FreeMax’s own MX-series tanks.
UAE Compliance and Nicotine Note
The FreeMax MX Replacement Coils are hardware only – a mesh coil head with no e-liquid or nicotine of its own – so the UAE’s commonly-cited 20mg/ml (2%) nicotine cap that applies to e-liquids does not apply to this product directly. Whatever nicotine strength you end up vaping through these coils depends entirely on the e-liquid you fill your tank with, which falls under its own compliance framework overseen by the Ministry of Industry and Advanced Technology (MoIAT) under the Emirates Conformity Assessment Scheme (ECAS). Check your e-liquid’s own strength and compliance mark separately from these coils. Vaping hardware sales in the UAE remain restricted to buyers aged 21 and over.
Pros and Cons
Where the FreeMax MX Replacement Coils 3-pack stands out, and where to plan ahead:
| Pros | Cons |
|---|---|
| 4 resistance options in one pack, 0.12ohm to 0.2ohm | Wattage range for the SS316L variant is not published |
| CoilTech 4.0 mesh build with Tea Fiber Cotton wicking | Specific compatible tank model is not named in the listing |
| 3 coils per pack for regular replacement | Only fits FreeMax’s MX coil form factor, not other brands’ tanks |
| SS316L option available for temperature-control setups | No e-liquid included – a separate purchase |
Price and Value
At AED 60 for a 3-coil pack with 4 resistance options to choose from, the FreeMax MX Replacement Coils sit at a reasonable mid-range price for mesh coils in Dubai, working out to roughly AED 20 per coil. Vaps Shop AE ships nationwide across the UAE with cash on delivery available; see the Delivery Terms and Conditions page for timing by emirate.
FreeMax MX Replacement Coils FAQ
How many coils come in this pack?
The listing ships 3 coils per pack, all drawn from the FreeMax MX Coil Series with CoilTech 4.0 construction.
Which MX coil resistance should I pick?
Choose the 0.15ohm MX1 Single Mesh for 50-80W, the 0.2ohm MX2 Double Mesh for 60-90W, the 0.15ohm MX3 Triple Mesh for 80-110W, or the 0.12ohm MX1 SS316L Single Mesh for temperature-control setups.
Will these coils fit my tank?
They are built for FreeMax’s MX coil form factor, so check that your tank uses the MX coil slot before ordering, since FreeMax’s short description does not name a specific compatible tank model.
Where can I buy FreeMax MX coils in Dubai?
Through Vaps Shop AE’s product listing, under the FreeMax brand page and the Coil for Vape category, with delivery to all seven emirates.
Verdict: Are the FreeMax MX Replacement Coils Worth Buying?
This FreeMax MX Replacement Coils review comes down to a practical case for existing FreeMax MX tank owners: 4 resistance options in one pack, CoilTech 4.0 mesh construction and a reasonable AED 60 price. It is not the pick if your tank uses a different brand’s coil slot, since these coils are built specifically for FreeMax’s MX series. For the wider hardware range, see our Vape Hardware, Kits and Coil Brands in Dubai guide, and the Pods / Coils category for other replacement options at Vaps Shop AE.
Reviewed by Md Ismail Hossain, Vaps Shop AE. Specifications checked against the manufacturer listing and current UAE vaping regulations. Last reviewed: September 2026.
FreeMax MX Replacement Coils review: Buying Checklist for Dubai
Before you order the FreeMax MX Replacement Coils review, check the live price and stock on the product page, look for the ECAS/MoIAT mark on the pack and ask us which certificate it carries. The UAE.S 5030:2018 standard (MoIAT) sets a 20mg/ml ceiling for e-liquid nicotine. VapsShop sells to adults aged 21+ only. That is store policy, and UAE regulations also apply.