Vaporesso GTi Coils in Dubai: Which iTank Models Take Them

Overview

GTi coils Dubai buyers ask about are Vaporesso’s replaceable mesh coils for the iTank family of tanks. We list the Vaporesso GTi Coils for iTanks from AED 49 (excl. VAT); this page covers resistances, which iTank models take them, and how to order.

Everything about specifications below comes from Vaporesso’s own pages, which we read on 7 November 2026. Where Vaporesso does not state something, we say so and point you to the box or manual. Our replacement vape coils category lists the wider range. Vaping products are for adults aged 21+ only.

• GTi coils Dubai: resistances and wattage
• iTank models that take GTi
• Pack contents and price
• GT-family coils on our shop
• Coil life
• Priming a new coil
• Ordering in Dubai

GTi coils Dubai: resistances and wattage

Vaporesso’s iTank T page lists four GTi mesh resistances, each with a wattage range printed by the maker:

• 0.15 ohm: 75 to 90 W
• 0.2 ohm: 60 to 75 W
• 0.4 ohm: 50 to 60 W
• 0.5 ohm: 30 to 40 W

On that page the 0.2 ohm coil is pre-installed and the 0.4 ohm coil is in the box, while 0.15 and 0.5 ohm are shown as compatible but not included. Vaporesso’s iTank 2 page lists only the 0.2 and 0.4 ohm coils, so the available options differ by tank.

Which of these resistances our listing contains is shown on the product page, so check the options there before ordering. For background on what resistance means for your setup, read our coil resistance guide.

Detailed wattage guidance for GTi belongs on its own page; use the ranges above as the maker’s printed figures and the manual for your device as the reference.

Which GTi for MTL?

Vaporesso’s own store describes its GTi mesh tanks as direct-to-lung (DTL) products, and none of the pages we read describe a GTi coil for mouth-to-lung use. We therefore do not recommend a GTi resistance for MTL. If that is your style, see our MTL pod kit guide and MTL vs DTL explainer.

iTank models that take GTi

From the Vaporesso pages we fetched, these tanks use GTi coils:

• iTank: Vaporesso’s iTank page lists GTi 0.2 ohm and GTi 0.4 ohm mesh coils, with one of each in the kit.
• iTank T: the page lists GTi mesh coils from 0.15 to 0.5 ohm and a tank size of 6 ml, 3 ml or 2 ml (TPD).
• iTank 2: the page lists GTi 0.2 and 0.4 ohm mesh coils and a tank size of 8 ml or 2 ml (TPD).

Vaporesso’s store also states that GTi mesh coils power the iTank T and the ARMOUR ULTRA kit. It treats GTX coils as a separate platform, not used in GTi tanks.

For any other tank, including third-party kits that carry an iTank name, we cannot state the fit. Confirm on the box or in the manual before you buy. Our vape kit category shows the devices we list.

Do GTi coils fit GT coils?

Vaporesso’s pages do not say that GTi and older GT coils are interchangeable, so we do not claim it. Match the coil name printed on your tank or in its manual: confirm on the box before ordering.

Pack contents and price

Our listing, Vaporesso GTi Coils for iTanks, is from AED 49 (excl. VAT). That is a “from” price, meaning the lowest variation on the page. Prices were checked 7 November 2026 and can change; see the product page for the current price.

Vaporesso’s pages do not give a coil count per replacement pack. The pack size is therefore not something we can quote here, so read the product page description and the packaging when it arrives. Do not compare per-coil cost until you have confirmed the count.

A simple way to budget: take the price shown and divide by the number of coils listed on the product page. For example, if a pack were to list 5 coils at AED 49, that works out at AED 9.80 per coil before VAT. That is illustrative arithmetic only, not a statement of the actual pack size.

The Vaporesso GTi Coils for iTanks page is the place to check options and price. Recurring coil cost matters more over time than the tank price, which is why we keep it in view.

GT-family coils on our shop

The table lists the Vaporesso coil listings on our shop at the time of writing, so you can see where GTi sits among other Vaporesso coil families. Names in the notes column are taken from the listing titles. Prices were checked 7 November 2026 and can change; see the product page for the current price.

Product	From price (AED, excl. VAT)	Notes taken from the product name
Vaporesso GTi Coils for iTanks	from AED 49	GTi coils for iTanks
Vaporesso GTX Mesh Coil 5pcs	from AED 45	GTX mesh, 5 pcs
Vaporesso GTX Coil	from AED 45	GTX coil
Vaporesso MTX Replacement Coil (5 PCS)	from AED 45	MTX, 5 pcs
Vaporesso QF Replacement Coils	from AED 45	QF, 3 pcs per pack
Vaporesso NRG GT Replacement Coils	from AED 45	NRG GT, 3 pcs per pack
Vaporesso GT-4 Core Coils for NRG Tank	from AED 45	GT-4 core, for NRG tank

The GTi listing is the only one named for iTanks. Match the coil family to your tank rather than choosing by price.

Coil life

Coil life depends on how you vape, the liquid you use and the wattage you set, so we do not give a fixed number of days for GTi. Our general guidance is in how long a coil lasts.

Because the maker’s wattage range is printed for each GTi resistance, staying inside that range for the coil in your tank is the sensible starting point. Our coil wattage guide explains what running above a range can mean in practice, and sweet liquids are covered in sweet e-liquid and coil life.

Replace the coil when the flavour drops or the taste turns harsh, and treat the manual for your tank as the reference.

Why does my GTi taste burnt?

A burnt taste has several possible causes, and we have not verified a GTi-specific one from Vaporesso. Our guides why a vape tastes burnt and dry hit vs burnt hit cover the usual checks.

Priming a new coil

We have not fetched a Vaporesso priming instruction for GTi coils, so we do not quote a wait time. Follow the instructions in your tank’s manual or on the box. As general steps:

1. Switch the device off and remove the old coil.
2. Fit the new GTi coil as shown in the manual.
3. Fill the tank with your liquid and let it stand before you vape.
4. Start at the low end of the wattage range printed for that resistance.

Our new pod wait time guide covers the waiting step, and dry hit on a new coil explains what to do if the first pulls taste dry.

How many coils per iTank?

One coil sits in the tank at a time. Vaporesso’s iTank T and iTank 2 pages describe one pre-installed 0.2 ohm coil plus one 0.4 ohm coil in the box, so a new kit gives you a spare.

Ordering in Dubai

• Dubai delivery takes about 2 hours, between 10am and 11pm.
• Other emirates take within 24 hours.
• Delivery is AED 25 flat, and free over AED 350.
• Minimum order is AED 100.
• Cash on delivery across the UAE, and card on delivery in Dubai, Sharjah and Ajman.
• Buyers must be 21+.

Full terms are on our delivery terms page. A GTi coil at AED 49 sits below the minimum order, so pair it with a refill or another item.

The UAE has its own standard for nicotine products, the UAE.S 5030:2018 standard (MoIAT). We link it for reference only.

For Vaporesso’s own product details, see the iTank T page on Vaporesso’s website, which we used for the resistance and wattage figures above.