Do OXVA Xlim Pro Pods Fit the Xlim SQ Pro 2 and NeXlim 2?

Overview

Yes for the Xlim SQ Pro 2, not directly for the NeXlim 2: OXVA lists Xlim-series pods for the SQ Pro 2, while the NeXlim 2 is built for NeXlim cartridges and uses Xlim pods only with an adapter.

Xlim Pro pods compatible with SQ Pro 2 kits are simple to confirm, because OXVA says so on its own product pages. The NeXlim 2 is where buyers go wrong, since the name looks like part of the Xlim family. This page gives a kit-by-kit answer, names the OXVA page each answer comes from, and shows how to check before you order. It is for adults aged 21 and over.

• Short answer and fit table
• Are Xlim Pro pods compatible with SQ Pro 2 kits?
• Xlim pods in the NeXlim 2
• Which Xlim-series pod types OXVA lists
• How to check before ordering
• What to do if a pod does not fit
• Ordering OXVA pods in Dubai

Short answer and fit table

The table below gives one answer per kit, taken from OXVA’s own pages and checked on 5 November 2026. We only record what OXVA states, which keeps the answer on Xlim Pro pods compatible with SQ Pro 2 kits honest. Where a page is silent, the table says so instead of guessing.

Kit	Do Xlim Pro pods fit?	What OXVA says	Source
Xlim Pro	Yes (its own pod family)	Compatible with any Xlim series, except Xlim C	OXVA Xlim Pro page
Xlim SQ Pro 2	Yes	Page headed “Xlim series all compatible”, listing Top Fill, V2 and EZ cartridges	OXVA Xlim SQ Pro 2 page
NeXlim 2	Not directly; adapter needed	Built for NeXlim cartridges; Xlim coils marked “used with an NeXlim Adaptor”	OXVA NeXlim 2 page

Do not assume the same pod fits every kit with Xlim in its name. Our replacement vape pods guide explains the general method for matching a pod to a device.

Are Xlim Pro pods compatible with SQ Pro 2 kits?

OXVA’s Xlim SQ Pro 2 page uses the wording “Xlim series all compatible”. Under that heading it shows three cartridge labels: Xlim Top Fill, Xlim V2 and Xlim EZ. It also shows device names beneath them, including the Xlim SQ Pro 2, Xlim Pro 2 and Xlim Pro.

The Xlim Pro page makes the matching statement from the other side. It describes the Top Fill pod as “compatible with any Xlim series”, with a footnote excluding the Xlim C, and says the device is fully compatible with all Xlim cartridges. Reading the two pages together, an Xlim Pro pod and an Xlim SQ Pro 2 belong to the same cartridge family.

The SQ Pro 2 page lists a 0.4, 0.6, 0.8 and 1.2 ohm range. The kit as OXVA describes it includes a 0.6 ohm Top Fill cartridge, pre-installed, and a 0.8 ohm one.

One limit applies. The wording is OXVA’s marketing text for the whole series. It does not list every pod variant ever sold under the Xlim name, so if you hold an older or unusual pod, compare it with the types in the section on pod types below.

Do Xlim V2 pods fit V3?

We do not claim this. The OXVA pages we read for this guide do not state that V2 pods fit V3 kits, so check the pod listing for your exact kit or ask OXVA support before ordering.

Xlim pods in the NeXlim 2

The NeXlim 2 is a separate product line. OXVA’s NeXlim 2 page lists NeXlim cartridges as compatible, in 4 ml and 2 ml versions, plus NeXlim replacement coils at 0.6, 0.8 and 1.2 ohm. The kit as listed ships with a 0.6 ohm cartridge installed and a 0.8 ohm spare.

Xlim pods are not presented as a direct fit. In the specification table, OXVA lists Xlim coils at 0.4, 0.6, 0.8 and 1.2 ohm and adds the note “used with an NeXlim Adaptor”.

OXVA sells that adapter as a separate product. Its page says it is “designed for the OXVA NeXlim Kit to match with OXVA Xlim Series Cartridges” and that it lets you use Xlim V2, Xlim Top Fill and EZ pods with the NeXlim system. That page names the NeXlim Kit rather than the NeXlim 2, so confirm that the adapter suits the NeXlim 2 before you buy one.

Are Xlim and NeXlim pods the same?

No. OXVA treats them as separate cartridge families, and its own pages describe an adapter for using Xlim pods in a NeXlim device. A plain Xlim Pro pod will not simply drop into a NeXlim 2 without that adapter, going by OXVA’s specification note.

Which Xlim-series pod types OXVA lists

A search for Xlim Pro pods compatible with SQ Pro kits usually means one of several pod types sold under the Xlim name. OXVA’s pages mention these:

• Xlim Top Fill. The pod supplied with the Xlim Pro and the SQ Pro 2 kits as OXVA describes them.
• Xlim V2. Listed alongside Top Fill under the “Xlim series all compatible” heading.
• Xlim EZ. Also listed under that heading.
• Prefilled cartridges. Mentioned on the Xlim SQ Pro page as part of the compatible Xlim series cartridges.

The one stated exception is the Xlim C, the version with changeable coils. The Xlim Pro page excludes it from the “any Xlim series” statement.

Does the Xlim C take the same pods?

OXVA’s Xlim Pro page says the any-Xlim-series wording is “except Xlim C”. So we do not treat Xlim C pods as interchangeable with Xlim Pro pods.

Pack names and resistance labels vary between sellers, so match the type name first and the resistance second. Our pods and coils category groups replacement parts by device.

How to check before ordering

A short routine avoids most wrong-pod orders:

1. Read the exact model name on your kit or its box. Xlim Pro, Xlim Pro 2, Xlim SQ Pro 2, Xlim GO and NeXlim 2 are different products.
2. Find that model on OXVA’s own product page and note the cartridge type it names.
3. Match that type to the pod listing you plan to buy, including the resistance you want.
4. Compare the pod pack with the pod already in your device, looking at shape and the type name printed on the packaging.
5. If any step is unclear, message us before ordering and we will check it with you.

Resistance is a separate choice from fit. Our vape coil resistance guide explains how ohm ratings are read, and the device maker’s manual remains the reference for the power range of each coil.

What if I no longer have the kit box?

Send us a photo of the kit and we will help you identify the model before you order a pod. Do not guess from the colour or shape alone, since several Xlim-named kits look alike.

If you are comparing small devices before buying, our MTL pod kit guide covers how they differ.

What to do if a pod does not fit

If a pod does not seat easily, stop and do not force it. A cartridge that does not fit is better checked than pushed in.

Work through these points instead:

1. Remove the pod and look at it. Confirm it is the type you meant to buy.
2. Check your kit name against the table at the top of this page.
3. Read the OXVA page for your kit and see which cartridge type it names.
4. If you own a NeXlim 2 and bought an Xlim pod, the missing piece is likely the adapter described above.
5. Contact us with the kit name and a photo of the pod pack, and we will help you sort out the right part.

If a pod fits but then leaks, that is a separate problem. Our guide to cleaning a leaking vape pod covers it, and the new pod wait time guide covers settling a new pod after filling.

Never open a device or modify a pod to make it fit. If you are unsure, the maker’s support team can confirm what suits your model.

Ordering OXVA pods in Dubai

We sell to adults aged 21 and over. Stock changes, so we do not list availability on this page; browse the pods and coils category and the pod systems category for what is currently listed.

• Delivery in Dubai takes about 2 hours, between 10am and 11pm.
• Other emirates are delivered within 24 hours.
• Delivery is a flat AED 25, and free over AED 350.
• The minimum order is AED 100.
• Cash on delivery is available across the UAE, and card on delivery in Dubai, Sharjah and Ajman.

Full terms are on our delivery terms page. If you are not sure which pod your kit takes, send us the model name first and we will check it against OXVA’s pages before you pay.