Do PnP Pods Fit Every Voopoo Drag Kit?

Overview

Whether PnP pods fit Drag kits depends on the model: Voopoo’s older Drag X and Drag S use the original PnP platform, while the newer Drag X2, S2, X3 and S3 use PnP X, and the two are not interchangeable.

Voopoo uses the “PnP” name across a lot of hardware, so it is easy to buy a pod that looks right and does not fit. This guide sorts the Drag range by the platform each maker page names, and it says plainly where the maker’s pages do not settle a question. It is written for adults aged 21+.

In this guide

• Short answer: do PnP pods fit Drag kits?
• Two platforms: PnP and PnP X
• Fit by Drag model
• Drag X and Drag S pods and coils
• Drag X2, S2, X3 and S3 cartridges
• Tank-style Drags: 4, 5 and 6
• How to check before you buy

Short answer: do PnP pods fit Drag kits?

No, not automatically. Do PnP pods fit Drag kits? Only when the pod and the kit are on the same platform, and Voopoo’s own pages show that the Drag range is split across two of them.

The older Drag X and Drag S pages describe a 4.5 ml magnetic pod and list PnP coils. The Drag X2 page goes further and says it is a whole new PnP X platform that is not compatible with original PnP products. The Drag S2 page says the same thing in almost the same words.

So the first job is to find your kit’s exact name. “Drag” on its own is not enough, because a Drag X, a Drag X2 and a Drag X3 are three different devices with different pod and coil systems.

Where Voopoo’s pages do not say whether two parts swap between models, we say so instead of guessing. The device maker’s manual and product page are the reference, not our summary.

Two platforms: PnP and PnP X

Voopoo’s original PnP system is built around PnP coils with codes such as PnP-VM1, PnP-VM3 and PnP-TW20. The Drag X page lists these coils against that kit, and the Drag S page does the same for its own set.

PnP X is the newer system. Voopoo’s PnP X platform page lists its own coils from 0.15 ohm to 1.0 ohm, and its own cartridges, in 5 ml and 2 ml sizes with side filling. The 2 ml sizes are the ones listed for markets with a tank-size limit.

The two names differ by a single letter, which is where most mistakes start. A “PnP” coil and a “PnP X” coil are different parts, and the Drag X2 page states that the new platform is not compatible with the original PnP products.

Is a PnP X cartridge the same as a PnP pod?

No. Voopoo’s pages treat them as separate systems. The Drag S2 page says PnP X is not compatible with products of the PnP platform. If a listing only says “PnP”, check whether it means the original platform or PnP X before you order.

Fit by Drag model

This table collects what Voopoo’s own product pages say for each Drag we checked. It records the platform and the pod or tank type, not stock. Where a page does not say, we have left it out.

Drag model	Platform named by Voopoo	Pod or tank type on the page
Drag X	PnP	4.5 ml magnetic pod (2 ml in TPD markets)
Drag S	PnP	4.5 ml magnetic pod (2 ml in TPD markets)
Drag X2	PnP X, not compatible with original PnP	PnP X cartridge, 5 ml or 2 ml
Drag S2	PnP X, not compatible with the PnP platform	PnP X cartridge, 5 ml or 2 ml
Drag X3	PnP X	PnP X cartridge, 5 ml or 2 ml
Drag S3	PnP X	PnP X cartridge, 5 ml or 2 ml
Drag 4	PnP	UFORCE-L tank, 5.5 ml (2 ml TPD)
Drag 5	PnP X	UFORCE-X tank, 5.5 ml (2 ml TPD)
Drag 6	PnP X	UFORCE-X Tank II, 5 ml (UFORCE-X Tank 2 ml in TPD kits)

The pages are written by Voopoo and may change, so treat this as a map, not a promise of what is in a given box.

Drag X and Drag S pods and coils

The original Drag X and Drag S both use a 4.5 ml magnetic-suction pod in standard kits, with a 2 ml replacement pod in the TPD version. Voopoo’s pages say the pod is made of PCTG and describe it as simple to refill.

Both pages say the kits can take a wide range of PnP coils, including RBA. The Drag X page lists PnP-VM1, PnP-VM3, PnP-VM4, PnP-TW15, PnP-TW20, PnP-TW30 and PnP-RBA as compatible, and it ships with PnP-VM1 and PnP-VM6. The Drag S page lists PnP-VM1, PnP-VM3, PnP-VM4, PnP-VM5, PnP-TW20 and PnP-TW30, plus PnP-RBA.

Notice that the two lists are not identical. The Drag S page does not list PnP-TW15 or PnP-VM6 as compatible, so do not assume every PnP coil suits both kits. Check the coil code against your own kit’s page.

For what coil resistance means in practice, see our coil resistance guide.

Can I put PnP X coils in a Drag X or Drag S?

Voopoo’s pages do not list PnP X coils for those two kits. They name PnP coils for the Drag X and Drag S, and they say PnP X is a separate system. Follow the coil codes on your kit’s own page.

Drag X2, S2, X3 and S3 cartridges

The Drag X2 and Drag S2 use PnP X cartridges. The Drag X2 page gives the cartridge as 5 ml in standard packs and 2 ml in the TPD pack, with side filling and top airflow. It includes PnP X 0.15 ohm and 0.3 ohm coils. The Drag S2 page lists 0.3 ohm and 0.6 ohm coils in its MTL kit.

The Drag X3 and Drag S3 pages also name the PnP X platform. The Drag S3 page says it is compatible with the PnP X platform and with new integrated pods, and it lists 0.6 ohm and 0.8 ohm cartridge options. The Drag X3 page lists PnP X DTL and MTL cartridges.

What the pages do not say is whether a cartridge sold for an X2 drops straight into an X3, or an S2 cartridge into an S3. Voopoo names the same platform on all four, but a shared platform name is not a written guarantee that every pod body is interchangeable. If you are matching across generations, confirm in the manual or on the box.

If your kit uses an integrated pod where the coil is built in, our guide to replacing the coil in an integrated pod explains what that changes.

Do Vinci PnP X pods fit a Drag?

Do not assume so. Voopoo’s PnP X page lists the Vinci cartridges as compatible with the Vinci series, and lists the Drag X2 and S2 cartridges against those two Drag models. Check your kit before ordering a Vinci cartridge for a Drag.

Tank-style Drags: 4, 5 and 6

Not every Drag takes a pod. The Drag 4, Drag 5 and Drag 6 pages describe tanks rather than cartridges, so “pod” is the wrong word for them.

The Drag 4 page names the UFORCE-L tank and says it is compatible with all PnP coils, including RBA coils. It also says the 2 ml TPD glass is not compatible with the standard or US versions, so the tank size has to match the version you own.

The Drag 5 page names the UFORCE-X tank and says its compatible coils are all PnP X series coils. The Drag 6 page describes a UFORCE-X Tank II and says it works with all PnP X coils. Both are on the newer platform, even though they are tank devices.

If you only want to know whether a tank or a pod suits your habits, our replacement pods guide covers the general side of that choice.

How to check before you buy

Work through this short list, in order:

1. Find the exact name. Look at the device base, the box, or the screen menu. Write down the full name, such as Drag X, Drag X2 or Drag S3.
2. Find the platform. Look it up on the matching Voopoo page. It will say PnP or PnP X.
3. Match the part. PnP pods fit Drag kits only on the same platform: a pod, cartridge or tank needs the same platform as the kit. A coil needs the code your kit’s page lists.
4. Match the size. Many Voopoo pages list a 2 ml version for markets with a tank-size limit (TPD). Check which one you own.
5. If still unsure, ask first. Send us the kit name and the part you are considering.

You can browse our pods and coils and pod systems categories. Our refill guide covers filling a pod once you have the right one.

Where do I find my Drag’s exact name?

It is usually printed on the device base or the retail box. Voopoo’s range pages list every Drag by name, so you can match what you see to a page.

Sources: Voopoo’s own pages for the PnP X platform, Drag X, Drag S, Drag X2, Drag S2, Drag X3, Drag S3, Drag 4, Drag 5 and Drag 6.